Construction Reinforcing Steel Mesh Plant For 2.5--5.0mm
Weft feeding method
The construction reinforicng steel mesh machine equipped with
automatic straightening cutting device. This device straighten and
cut weft wire into fixed length. Then worker put those weft wires
into hopper, the weft wires will fall automatically.
Warp feeding method
Coil wires are put on the wire tray. Firstly, let coil wires
through straightening device,this device will make the coil wire
become straight. Then let coil wire through into warp hole, finally
the entire welding process is automatic.
The machine adopts synchronous and PLC control technique. The
welding power comes from the spring. It is easily to control the
welding pressure, more over ten times than the traditional hopper.
Welding time and sub-control welding adopt Japan, Sony digital
control system which can be input to touch screen control panel to
adjust the mesh size, and it can weld different size mesh on the
same wire mesh panel. What’s more, the below electrodes installed
water-cooling equipment, which reduce the loss and ensure welding
Pulling mesh system
The mesh pulling system is controlled by servo motor, which makes
the pulling mesh aperture more standard and accurate. This
automatic pulling device can be separated from the mesh welding
Automatic mesh panel cutting machine
This machine can weld continuous wire mesh sheets. After the wire
mesh sheets enter into the automatic cutting machine, the cutting machine can cut thewire mesh sheet into fixed-size according to you need.
Construction Reinforcing Steel Mesh Plant Material suitable for low carbon wire, galvanized wire and so on.
|Number of Electrodes||24||32||40||48|
|Max Mesh Width||1200mm||1600mm||2100mm||2500mm|
|Cross Wire Space||50-200mm||50-200mm||50-200mm||50-200mm|
|Line Wire Space||50-200mm||50-200mm||50-200mm||50-200mm|
|Cross Wire Feeding||Pre-cut||Pre-cut||Pre-cut||Pre-cut|
|Line Wire Feeding||Coil||Coil||Coil||Coil|
|Control System||PLC or SCM||PLC or SCM||PLC or SCM||PLC or SCM|
wire straightening and cutting machine,,cutting mesh machine,line wire straightening device,pay-offs
The steel mesh is used for pavement, Bridges, airports, gardens,
public places, squares, highways, railways, highways, factories and